Price: ā¹3,999 - ā¹2,785.00
(as of Jul 15, 2024 22:22:04 UTC – Details)
Product Description
What is Wireless Water Level Indicator?
Wireless water Level indicator Measures the Water inside any Water tank and displays it to the User without any need of Transmission wire/Cable from Water Tank to Main Unit.
It also Gives Loud beep when Water tank is full and Intermittent beeps when water tank reaches the reserve water Level.
How It Works?
Transmitter Unit
Device Comes with One Transmission Unit that needs to be installed on Inner roof of water tank with help of two rubber blocks and Super Glue OR with the Help of screws as per convenience.
This Device has 4 inbuilt LEVEL Sensors which can be adjusted as per the requirement to Sense the Water Level.
Transmitter has a Set of 3 AA batteries inside to power it for up to 3 years and can be replaced Easily with new batteries.
No External Power Source is required to power the Transmitter Unit and it comes with an Open-Air range of upto1 KMs or Upto a 5 Floor building.
Receiver Unit
Device Comes with One Receiver Module that can be installed at any convenient Location Inside the Home.
This Module has inbuilt Rechargeable Lithium-ion Battery inside that can be recharged using any Mini USB charger.
Once charged it can give power back up of more that 48 HRS. Charger is also provided with the Device.
This Receiver Displays Different colors based on Water Level inside the tank.
Can I use Multiple Devices in One Building/Area?
YES, Every Receiver and Transmitter works on a unique key and will not interfere with another Pair.
User should not worry about using multiple devices in same building or in its nearby Buildings as we have more than 6 Lac unique Keys for Each pair.
Also, there is no Pairing required for the units and user just needs to install the units and it will work in Pure wireless Manner without any Flaw.
Unique Features Long Range of upto 5 Floor Building. Long life of AA Cells of up to 3 years inside Transmitter. Waterproof IP rated Transmitter Box for accidental water spills. No worry of Monkeys or HARSH weather for Transmitter box due its Sturdy Design. Specials Heartbeat Feature to quickly Verifying the Issues LOW level Alarm with Overflow Alarm to Avoid Empty Tank Situations Minimal Repair Cost in case of any Damage or Fault.
Receiver Unique Features.
This is Very Light Portable Device that interacts with User and Displays Different Levels and Warning By means of Colorful LED and a set of Dual Buzzers. There is Once soft Touch Button that can be used to stop the Buzzer ring during the Overflow Alarm or Reserve tank Alarm.
Indicates 4 Different Levels by Set of 4 Colors in Indicator.
RED : Reserve(25%) Yellow : 50% Blue : 75% Green : Full(100%)
Blinks Green and Blue color during Initial Pairing once Device is Powered On.
Long power back up of more than 48 Hrs.
If Battery in Transmitter is About to die it Continues its operation and shows the water Level, but LED will Keep on Blinking to alert the user to change the Battery in the Transmitter unit.
Transmitter Unique Features
Transmitter Unit is Installed inside water tank, and it has IP65 rated Box that Encloses a set of 3 AA Batteries (Regular Pencil cells), Water Sensing Unit and wireless Unit & one Heartbeat LED.
This device has Wireless range of up to 5 Floors building and long Power backup of more than 3 years on single set of 3AA cells.
This Unit Senses the Levels and take a time of 10 Seconds for stabilization and Transmission of new Level to Receiver Unit.
Blinking Heartbeat LED confirms that Device is Active and working Properly.
Very easy to Install inside the water tank with sturdy ABS material makes it Weather and Monkeys proof with 4 Customizable brass sensors.
All these 4 Level Sensorsā Wires (Red, Blue, Yellow, Green) can be Extended by cutting & adding extra Wire or cut or wrap short as per the Water Tank Depth or Height.
HOW to Install?
It is very Easy to install the Device with 2 steps Installation.
Transmitter Installation
Take out the Transmitter and check for blinking blue LED in the Transmitter box. Now measure the tank height in which it is needs to be installed and adjust the length of sensor wires as per the Tank Height such that red Sensor wire goes to the bottom and Green just below the overflow pipe.
Clean the inner roof of tank and Fix the Transmitter unit with the help of Super glue and rubber block or with the help of Two screws as per his/her Requirement. Here we are done with Transmitter Installation.
For receiver Unit just power it ON by pressing the side Switch and it will blink green and blue light alternatively. Wait for 10 Minutes for Device Boot and Pairing. Once paired Stable color will be displayed to the User as per the level inside the tank and your installation is complete
Cost Effective as Compared to Wired Device
Hassle Free & Non-Complicated.
Wired Device needs Timely Maintenance and Wire will be
damaged over the period time, Hence Recurring Money Wastage.
Wired Device Can’t be placed at Convenient Place.
Wireless is Easy to Install, Even A Child can Install it.
as it is complete Hassle Free & Non-Complicated.
Water Tank Overflow alarm to alert user before overflowing Water.
Empty Water Tank Alarm to alert user Before Tank goes Empty.
Transmitter: 1-3 years of Cell/Batteries life. It is Waterproof as well which saves accidental fall in water tank.
Four Water Level Indications: (Full/Alarm) 100% – 75% – 50% – 25% (Reserve/Alarm)
Good Quality Brass Sensors which are far better than Steel Sensors Which do not rust or contaminate water ever.
24/7 Customer Support.
All parts Covered in Guarantee.
Reviews
Clear filtersThere are no reviews yet.